Prepared Tests may be run individually or one after another as a group at this screen. "Start Tests" button runs the test(s) which were sent to device(s). "Stop Tests" button finishes the test(s) anytime desired. It is not necessary to keep the devices connected to the computer unless the test includes an action that needs connection.

    Test Groups can be copied by using Copy Test Group button for further modifications..

    Defining a "Test Group Name" and a "Description" is a must for Test Groups. Test Group Name may be the model of the device under test. Description may contain information about the test. Prepared test scenarios are selected from the "Test to RUN" list. Repeat time is entered to "Run ... Times". Sim, Wifi, CPU, GPU, Memory and Battery informations are recorded to the reports at the frequency value entered in the related cell. After sending the prepared scenario to the device(s), test may be started both from computer (Start Tests) or from the device under test by uTAFS Start button.

     With button, related test may be edited and recorded easily to run again.

     At the example below, text recognation and image processing tests prepared for "device 15" will run one after another as a group. Sim, Wifi, CPU, GPU, Memory and Battery informations will be recorded every 5 seconds.