Designed to test Bluetooth performance of the devices. This test must be performed with two devices. The test devices pair with each other and realize scenario actions. Transmission should not be repeated during the test. After each test, running applications must be terminated on the device. Following actions may be used for BlueTooth test scenarios:

1. Set BlueTooth ON: Sets the Bluetooth on. Bluetooth affects facts like battery usage, device performance and heating.
2. Set BlueTooth OFF: Sets the Bluetooth off. Bluetooth affects facts like battery usage, device performance and heating.
3. Pair with the device: This command pairs the two test devices.
4. Send & Verify ... FILE over BlueTooth: Sends the file which is choosen from the computer to the paired device over Bluetooth. The path of the file must be entered in Parameter (1) and can be picked by using search button. Sender device adds its own Bluetooth Mac adress to the file name. So that, sender and receiver can control they are communicating with correct device. Time Out Period must be set suitable according to the file's size. For example a 100 MB file is sent and received in approximately 20 minutes. If it's set short, test fails due to Time Out, but also when it's set too long, getting the result may take much longer: it awaits the Maximum Duration Time instead of stopping in case of a problem.
5. Send ... VCARD over BlueTooth: Sends a VCARD from contacts list to the paired device over BlueTooth. The person who sent is required to have the phone number. Otherwise the transmission will failed. Both devices are required to have the person with the same name in record. The path of the VCARD must be entered in Parameter (1) in fully.
6. Send ALL contacts over Bluetooth: The device sends all contacts list to the matching device via bluetooth. The content of the contacts list has no significance.
7. Wait EXTRA ... second(s): Waits extra amount of seconds entered in Parameter (1) before taking the next step of the test.
8. Wait EXTRA ... minute(s): Waits extra amount of minutes entered in Parameter (1) before taking the next step of the test.
9. Wait EXTRA... hour(s): Waits extra amount of hours entered in Parameter (1) before taking the next step of the test.
10. Show All Actions: This button stands at the bottom of the Action List. It opens a new window where all test actions can be seen together. This option allows us to use all actions in any scenario.

In this test:

1. Sets Bluetooth on, action must be done in 3 seconds, otherwise test fails due to Timeout,
2. Pairs two connected devices, action must be done in 60 seconds, otherwise test fails due to Timeout,
3. The paired  devices send and verify the file entered in Parameter (1) to each other, Max Duration Time for this action is set to 20 minutes,
4. Sets Bluetooth off, action must be done in 3 seconds, otherwise test fails due to Timeout,